Abụọ n'ime otu jụrụ ems ahụ sculpt igwe

Abụọ n'ime otu jụrụ ems ahụ sculpt igwe

Sincoheren ọhụrụ ngwaahịa, abụọ n'ime otu jụrụ Sincosculpt ngwá, Njikota oyi kpọnwụrụ abụba dissolving na elu-ike lekwasịrị anya magnetik vibration ife technology ga-enwe mmetụta dị mma na ahu arọ ọnwụ na ịkpụzi, n'ụzọ dị irè mbenata abụba mgbe ike muscle.The akụrụngwa bụ mma na-egbu mgbu, na-enweghị ịwa ahụ, mgbakasị ahụ, ọgwụ na mmetụta.


Nkọwa ngwaahịa

Sincoheren ọhụrụ ngwaahịa, abụọ n'ime otu jụrụ Sincosculpt ngwá, Njikota oyi kpọnwụrụ abụba dissolving na elu-ike lekwasịrị anya magnetik vibration ife technology ga-enwe mmetụta dị mma na ahu arọ ọnwụ na ịkpụzi, n'ụzọ dị irè mbenata abụba mgbe ike muscle.The akụrụngwa bụ mma na-egbu mgbu, na-enweghị ịwa ahụ, mgbakasị ahụ, ọgwụ na mmetụta.

360 abụba oyi kpọnwụrụ

Ụkpụrụ nke Sincosculpt

Sincosculpt na-eji teknụzụ magnetik ịma jijiji gbadoro ụkwụ na-adịghị emebi emebi iji wepụta ike magnetik ugboro ugboro.

Mgbochi akwara 100% nke teknụzụ Sincosculpt nwere ike ịkpalite ọtụtụ lipolysis, fatty acids na-agbaji site na triglyceric acid, ma na-akwakọba ọnụ ọgụgụ buru ibu na sel abụba.Ntinye uche nke fatty acid dị oke elu, nke ga-eme ka mkpụrụ ndụ abụba banye apoptosis ma wepụ ya n'ahụ site na metabolism nkịtị n'ime izu ole na ole.

Ya mere, ngwa akwara ịma mma Sincosculpt nwere ike wusie ike na ịbawanye uru ahụ ka ọ na-enweta mmetụta nke ibelata abụba.

360 abụba oyi kpọnwụrụ

ụkpụrụ Coolplas friza

Site na iji 360°semiconductor silica gel freezling technology ruo ezigbo okpomọkụ nke nwere ike ime ka abụba cell apoptosis-5°C ka -11°C,nke bụ ume jụrụ iji nweta ihe na-abụghị invasive na ike lipid-eweda mmetụta.Different. si abụba cell necrosis, abụba cell apoptosis bụ eke ụdị abụba ọzịza na afo ebuga obi jụrụ abụba mkpụrụ ndụ na-ebibi ebelata ọnụ ọgụgụ nke abụba mkpụrụ ndụ na afo.

360 abụba oyi kpọnwụrụ

Ugboro ọgwụgwọ akwadoro na etiti oge

Coolplas: A na-atụkarị aro ya ugboro 3-5 dị ka usoro ọgwụgwọ zuru oke, yana nkeji otu ọnwa n'oge ọ bụla.Ogologo oge ọgwụgwọ na-adabere na akụkụ ahụ a ga-agwọ ya na ọkpụrụkpụ nke oyi akwa nke onye ahụ.Anyị na-akwado ọgwụgwọ ndị a

oge maka akụkụ ahụ nke ọ bụla: akụkụ dị oke obosara maka nkeji 40 ruo 60 oge ọ bụla (dịka afọ, afọ, apata ụkwụ, wdg) Maka ebe ndị dị warara bụ nkeji 20 ruo 30.(dị ka agba abụọ, ogwe aka, ogwe aka, wdg)

Sincosculpt: 4-6 ugboro dị ka usoro ọgwụgwọ, otu ugboro kwa ụbọchị 2-3, otu akụkụ otu ugboro kwa nkeji 30, N'ozuzu, 6-8 ọgwụgwọ ọmụmụ ka atọrọ maka oghere kaadị, na ezi utịp nwere ike nweta.Mmetụta kachasị mma bụ izu 2-4 mgbe ọgwụgwọ gasịrị.Iji gbajie abụba na ịbawanye ụba anụ ahụ, ndị ọrịa kwesịrị inwe ndidi.Ọtụtụ mgbe mgbe ọgwụgwọ 4-6 gasịrị, oke akwara na-abawanye site na 16%, ebe enwere ike belata abụba site na 19%.360 abụba oyi kpọnwụrụ

Nka nka

Aha ngwaahịa

Abụọ n'ime otu friza+sincosculpt

Ụkpụrụ nka nka

Na-akpụ akpụ + nnukwu ike ndọta lekwasịrị anya

Ngosipụta ihuenyo

10.4 inch nnukwu LCD

Ike magnetik ike

8-100% (7 TeslA)

Ugboro mmepụta

5Hz-200Hz

Okpomọkụ jụrụ oyi

1-5 faịlụ (okpomọkụ jụrụ oyi 0℃ ruo -11℃)

Igwe ọkụ ọkụ

0-4 gia (na-ekpo ọkụ maka nkeji 3, kpo oku

okpomọkụ 37 ruo 45 ℃)

Mmanya agụụ

1-5 faịlụ (10-50Kpa)

Ntinye voltaji

110V/220V

Ike mmepụta

300-500w

Fuse

20A

Kpọtụrụ anyị Ugbu a!

Dee ozi gị ebe a ziga anyị ya

  • Nke gara aga:
  • Osote: